MIG/MAG WELDING GUNS MT-360 MULTIMET

MT welding guns are intended for manualMIG and MAG welding with an electrode wire in protective gas shielding.  The MAG method is used for low-alloy and non-alloy steel welding. The MIG method is used for welding high-alloy steels and non-ferrous metals in argon shielding. The offered gun is colled with a shielding gas. The gun ends with a standardized EURO-type connection suitable for most welding semi-automatic machines. For welding light alloys, it is recommended to use guide inserts made of PTFE or carbon-PTFE.

Kategoria:

Opis

Technical data
Maximum welding current in operation cycle 60% for CO2 300A
Maximum welding current in operation cycle 60% for mixture 270A
Wire diameter range 0.8-1.2 mm
Protective gas flow rate 10-18 l/min
Cooling type gas
Cord length 3 m, 4 m, 5 m
Wear parts T-360
Gas nozzle MT 360 Contact tip M8 Ø 0.8 for aluminium Burner MT 360 PTFE wire guide (for Al)
Contact tip M8 Ø 0.8 Contact tip M8 Ø 1.0 for aluminium Insulating sleeve MT 360 0.6 – 0.8 mm blue 3 m, 4 m, 5 m
Contact tip M8 Ø 1.0 Contact tip M8 Ø 1.2 for aluminium Connector MT 360 1.0 – 1.2 mm red 3 m, 4 m, 5 m
Contact tip M8 Ø 1.2 Contact tip M8 Ø 1.6 for aluminium Steel wire guide: 1.4 – 1.6 mm yellow 3 m, 4 m, 5 m
Contact tip M8 Ø 1.6 0.6 – 0.8 mm blue 3 m, 4 m, 5 m MT gun handle
Contact tip M8 Ø 0.8 CuCrZr (reinforced) 1.0 – 1.2 mm red 3 m, 4 m, 5 m
Contact tip M8 Ø 1.0 CuCrZr (reinforced) 1.4 – 1.6 mm yellow 3 m, 4 m, 5 m
Contact tip M8 Ø 1.2 CuCrZr (reinforced)
Contact tip M8 Ø 1.6 CuCrZr (reinforced)

 

uchwyty_spawalnicze_mig_mag_mt_360_multimet

Podobne produkty