MIG/MAG WELDING GUNS MT-501 W MULTIMET

MT welding guns are intended for manualMIG and MAG welding with an electrode wire in protective gas shielding.  The MAG method is used for low-alloy and non-alloy steel welding. The MIG method is used for welding high-alloy steels and non-ferrous metals in argon shielding. The offered gun is colled with a shielding gas. The gun ends with a standardized EURO-type connection suitable for most welding semi-automatic machines. For welding light alloys, it is recommended to use guide inserts made of PTFE or carbon-PTFE.

Kategoria:

Opis

Technical data
Maximum welding current in operation cycle 60% for CO2 500A
Maximum welding current in operation cycle 60% for mixture 450A
Wire diameter range 0.8-1.6 mm
Protective gas flow rate 10-18 l/min
Cooling type  liquid
Cord length 3 m, 4 m, 5 m
Wear parts MT-501W
Gas nozzle MT 401/501 Contact tip M8 Ø 0.8 for aluminium Burner MT 501 PTFE wire guide (for Al)
Contact tip M8 Ø 0.8 Contact tip M8 Ø 1.0 for aluminium Insulating sleeve MT 401.501 0.6 – 0.8 mm blue 3 m, 4 m, 5 m
Contact tip M8 Ø 1.0 Contact tip M8 Ø 1.2 for aluminium Connector MT 401/501 1.0 – 1.2 mm red 3 m, 4 m, 5 m
Contact tip M8 Ø 1.2 Contact tip M8 Ø 1.6 for aluminium Insulating ring MT 401/501 1.4 – 1.6 mm yellow 3 m, 4 m, 5 m
Contact tip M8 Ø 1.6 Non-insulated steel wire guide: MT gun handle
Contact tip M8 Ø 0.8 CuCrZr (reinforced) 0.6 – 0.8 mm non-insulated 3 m, 4 m, 5 m
Contact tip M8 Ø 1.0 CuCrZr (reinforced) 1.0 – 1.2 mm non-insulated 3 m, 4 m, 5 m
Contact tip M8 Ø 1.2 CuCrZr (reinforced) 1.4 – 1.6 mm non-insulated 3 m, 4 m, 5 m
Contact tip M8 Ø 1.6 CuCrZr (reinforced)

 

uchwyty_spawalnicze_mig_mag_mb_15_grip_mb_25_grip

Podobne produkty