MIG/MAG WELDING GUNSMT-250 MULTIMET

MT welding guns are intended for manualMIG and MAG welding with an electrode wire in protective gas shielding.  The MAG method is used for low-alloy and non-alloy steel welding. The MIG method is used for welding high-alloy steels and non-ferrous metals in argon shielding. The offered gun is colled with a shielding gas. The gun ends with a standardized EURO-type connection suitable for most welding semi-automatic machines. For welding light alloys, it is recommended to use guide inserts made of PTFE or carbon-PTFE.

Kategoria:

Opis

Technical data
Maximum welding current in operation cycle 60% for CO2 230A
Maximum welding current in operation cycle 60% for mixture 200A
Wire diameter range 0.8-1.2 mm
Protective gas flow rate 10-18 l/min
Cooling type gaz
Cord length 3 m, 4 m, 5 m
Wear parts T-250
Gas nozzle MT 250 Contact tip M8 Ø 0.8 for aluminium Burner MT 250 PTFE wire guide (for Al)
Contact tip M8 Ø 0.6 Contact tip Ø 1.0 for aluminium Spring MT 250 0.6 – 0.8 mm blue 3 m, 4 m, 5 m
Contact tip M8 Ø 0.8 Contact tip Ø 1.2 for aluminium Connector MT 250 1.0 – 1.2 mm red 3 m, 4 m, 5 m
Contact tip Ø 1.0 Steel wire guide: 1.4 – 1.6 mm yellow 3 m, 4 m, 5 m
Contact tip Ø 1.2 Contact tip Ø 0.8 CuCrZr (reinforced) 0,6 – 0,8 mm niebieski 3 m, 4 m, 5 m MT gun handle
Contact tip Ø 1.0 CuCrZr (reinforced) 1,0 – 1,2 mm czerwony 3 m, 4 m, 5 m
Contact tip Ø 1.2 CuCrZr (reinforced) 1,4 – 1,6 mm żółty 3 m, 4 m, 5 m

uchwyty_spawalnicze_mig_mag_mt_250_multimet

Podobne produkty